PLA+ 3D printing
PLA+ is PLA with impact-modifying additives, so parts are less brittle and take a knock better while keeping the easy printing and clean surface finish PLA is known for.
Upload a file for an instant quoteWhat PLA+ is good for
- Functional prototypes that get handled, clipped together or dropped
- Brackets, clips, mounts and housings for indoor use
- Parts that need to flex slightly before they fail rather than snap
What to know before you order
"PLA+" isn't a single standardized material. Each filament maker uses its own blend, so exact stiffness and toughness vary a little from one brand to the next. What stays the same is the trade: better toughness than standard PLA, with the same limitations on heat.
Like PLA, it softens at fairly low temperatures, so keep it away from hot cars and direct sun. For outdoor parts use ASA; for parts that need more chemical and moisture resistance, consider PETG.
How ordering works
Upload your 3MF, choose PLA+ and a color that's in stock, and you'll see an instant quote with an estimated print time. We print it, photograph the finished part for you to review, then ship it anywhere in the United States, or store it for you until you're ready.
Common questions
What's the difference between PLA and PLA+?
PLA+ is a modified PLA that is tougher and less brittle. Both are easy to print with good surface finish and share similar heat limits.
Should I choose PLA+ or PETG?
PLA+ is stiffer and a little easier to get a crisp finish with. PETG tolerates heat, moisture and chemicals better and is more forgiving under load. Choose by what the part will face.